Product catalog » calibration

Calibration Support for shear

XAN000003 - For shear sensor calibration using weights. Excluding weights and calibration tools.

Calibration set 2-1000 g

XAN070200 - Calibration set consist of weights 2 - 1000 g, certificate, tools and calibration support for shear.

Calibration support Chatillon

XAN003001 - Support for pull, push and shear sensor calibration of 2N, 20N, 100N, 500N and 1000N sensors. Excluding Chatillon Sensor mounting options, sensor and calibration tools.

Force gauge Chatillon reader (DFS-R-ND)

PCF000001 - To interface with Chatillon force sensors. Only one sensor can be connected at a time. Included power adaptor and serial cable.

Force sensor Chatillon 10N (SLC-0002)

PCF000010 - For calibration of Pull, Push and Shear 2N sensor. Included: sensor mounting bold and Push/Pull interface. Excluded: Calibration tools and Push/Pull tool.

Force sensor Chatillon 100N (SLC-0025)

PCF000100 - For calibration of Pull, Push and Shear 20N sensor. Included: sensor mounting bold and Push/Pull interface. Excluded: Calibration tools and Push/Pull tool.

Force sensor Chatillon 500N (SLC-0100)

PCF000500 - For calibration of Pull, Push and Shear 100N sensor. Included: sensor mounting bold and Push/Pull interface. Excluded: Calibration tools and Push/Pull tool.

Force sensor Chatillon 2500N (SLC-0500)

PCF002500 - For calibration of Pull, Push and Shear 500N sensor. Included: sensor mounting bold and Push/Pull interface. Excluded: Calibration tools and Push/Pull tool.

Force sensor Chatillon 5000N (SLC-1000)

PCF005000 - For calibration of Shear 1000N sensor. Included: sensor mounting bold and Push/Pull interface. Excluded: Calibration tools and Push/Pull tool.

Jig 1:1

XAG000101 - For shear calibration. The maximum weight that can be used is 1kg. Included protection cover for jig arm (not shown). Excluded calibration tools.

Jig 1:8

XAG000108 - For shear calibration. The maximum weight that can be used is 1kg. Included protection cover for jig arm (not shown). Excluded calibration tools.

Jig 1:20

XAG000120 - For shear calibration. The maximum weight that can be used is 10kg. Included protection cover for jig arm (not shown). Excluded calibration tools.

Jig 1:20 extension

XAG001120 - For large weights.

Weight set 2-1000 g + certificate

XAW001000 - Box including weights: 2 g, 5 g, 10 g, 20 g, 50 g, 100 g, 200 g, 500 g and 1000 g.

Weight 1 kg + certificate

XAW001001 -

Weight 2 kg + certificate

XAW002000 -

Weight 5 kg + certificate

XAW005000 -

Weight 10 kg + certificate

XAW010000 -

Repeatability test jig for load sensors

XAA000001 - Adjustable setpoint for GR&R study of pull, push and shear sensors.

Calibration Pull hook 1,2 mm

TOC002000 - For XAW calibration weights.

Calibration Pull hook 5mm flat side

TOC002005 - For XAW calibration weights.

Calibration Pull hook LMU M6

TOC002106 - For XAW calibration weights.

Calibration Shear tool 5mm

TOC003005 - For XAW calibration weights in combination with XAN000003 Callibration support.

Calibration Shear tool 7mm

TOC003007 - For XAW calibration weights in combination with XAN000003 Callibration support.

Calibration Shear tool 12mm

TOC003012 - For XAW calibration weights in combination with XAN000003 Callibration support.

Calibration Chatillon tool D 5mm

TOC001005 - For XAG calibration jigs and XAN003001 Calibration support Chatillon.

Calibration Chatillon tool D 7mm

TOC001007 - For XAG calibration jigs and XAN003001 Calibration support Chatillon.

Calibration Chatillon tool D 12mm

TOC001012 - For XAG calibration jigs and XAN003001 Calibration support Chatillon.

Calibration Tool Chatillon Push/Pull

TOC004001 - Tool for in combination with XAN003001. TAL000003 is required for this part.

Contact us

Did we catch your attention? Please contact us for more information or to request a demonstration or a quotation.