Product catalog » tools and toolholders

Wire Hook 25μm S=0,5 mm L=30 mm

TOP100025 - Foot diameter D=25μm, Foot length F=75μm, Wire hook length L=30mm, Shaft diameter S=0,5mm

Wire Hook 50μm S=0,5 mm L=30 mm

TOP100050 - Foot diameter D=50μm, Foot length F=150μm, Wire hook length L=30mm, Shaft diameter S=0,5mm

Wire Hook 75μm S=0,5 mm L=30 mm

TOP100075 - Foot diameter D=75μm, Foot length F=225μm, Wire hook length L=30mm, Shaft diameter S=0,5mm

Wire Hook 100μm S=0,5 mm L=30 mm

TOP100100 - Foot diameter D=100μm, Foot length F=300μm, Wire hook length L=30mm, Shaft diameter S=0,5mm

Wire Hook 25μm Fine Pitch S=0,5 mm

TOP110025 - Foot diameter D=25μm, Foot length F=65μm, Wire hook length L=30mm, Shaft diameter S=0,5mm

Wire Hook 50μm Fine Pitch S=0,5 mm

TOP110050 - Foot diameter D=50μm, Foot length F=100μm, Wire hook length L=30mm, Shaft diameter S=0,5mm

Wire Hook 75μm Fine Pitch S=0,5 mm

TOP110075 - Foot diameter D=75μm, Foot length F=200μm, Wire hook length L=30mm, Shaft diameter S=0,5mm

Wire Hook 100μm Fine Pitch S=0,5 mm

TOP110100 - Foot diameter D=100μm, Foot length F=200μm, Wire hook length L=30mm, Shaft diameter S=0,5mm

Wire Hook Standard D25

TOP000025 - Foot diameter D=25μm, Foot length F=75μm, Wire hook length L=55mm, Shaft diameter S=1,2mm

Wire Hook Fine Pitch D25

TOP010025 - Foot diameter D=25μm, Foot length F=65μm, Shaft length H=35mm, Shaft diameter S=1,2mm, Tip length T=20mm, Total length L=55mm

Wire Hook Standard D50

TOP000050 - Foot diameter D=50μm, Foot length F=150μm, Wire hook length L=55mm, Shaft diameter S=1,2mm

Wire Hook Fine Pitch D50

TOP010050 - Foot diameter D=50μm, Foot length F=100μm, Shaft length H=35mm, Shaft diameter S=1,2mm, Tip length T=20mm, Total length L=55mm

Wire Hook Standard D75

TOP000075 - Foot diameter D=75μm, Foot length F=225μm, Wire hook length L=55mm, Shaft diameter S=1,2mm

Wire Hook Fine Pitch D75

TOP010075 - Foot diameter D=75μm, Foot length F=150μm, Shaft length H=35mm, Shaft diameter S=1,2mm, Tip length T=20mm, Total length L=55mm

Wire Hook Standard D100

TOP000100 - Foot diameter D=100μm, Foot length F=300μm, Wire hook length L=55mm, Shaft diameter S=1,2mm

Wire Hook Fine Pitch D100

TOP010100 - Foot diameter D=100μm, Foot length F=200μm, Shaft length H=35mm, Shaft diameter S=1,2mm, Tip length T=20mm, Total length L=55mm

Wire Hook Standard D150

TOP000150 - Foot diameter D=150μm, Foot length F=450μm, Wire hook length L=60mm, Shaft diameter S=1,2mm

Wire Hook Standard D200

TOP000200 - Foot diameter D=200μm, Foot length F=600μm, Wire hook length L=60mm, Shaft diameter S=1,2mm

Wire Hook Standard D250

TOP000250 - Foot diameter D=250μm, Foot length F=750μm, Wire hook length L=60mm, Shaft diameter S=1,2mm

Wire Hook Standard D300

TOP000300 - Foot diameter D=300μm, Foot length F=900μm, Wire hook length L=60mm, Shaft diameter S=1,2mm

Wire Hook Standard D400

TOP000400 - Foot diameter D=400μm, Foot length F=1200μm, Wire hook length L=60mm, Shaft diameter S=1,2mm

Wire Hook Standard D500

TOP000500 - Foot diameter D=500μm, Foot length F=1500μm, Wire hook length L=60mm, Shaft diameter S=1,2mm

Wire Hook Standard D600

TOP000600 - Foot diameter D=600μm, Foot length F=1800μm, Wire hook length L=60mm, Shaft diameter S=1,2mm

Wire Hook Standard D700

TOP000700 - Foot diameter D=700μm, Foot length F=2100μm, Wire hook length L=60mm, Shaft diameter S=1,2mm

Wire Hook Standard D800

TOP000800 - Foot diameter D=800μm, Foot length F=2400μm, Wire hook length L=60mm, Shaft diameter S=1,2mm

Wire Hook Standard D900

TOP000900 - Foot diameter D=900μm, Foot length F=2700μm, Wire hook length L=60mm, Shaft diameter S=1,2mm

Wire Hook Standard D1000

TOP001000 - Foot diameter D=1000μm, Foot length F=3000μm, Wire hook length L=60mm, Shaft diameter S=1,2mm

Wire Hook Standard D1100

TOP001100 - Foot diameter D=1100μm, Foot length F=3300μm, Wire hook length L=60mm, Shaft diameter S=1,2mm

Wire Hook Standard D1200

TOP001200 - Foot diameter D=1200μm, Foot length F=3600μm, Wire hook length L=60mm, Shaft diameter S=1,2mm

Wire Hook Non-destructive 25μm S=5 mm

TOP031025 - Non-destructive pull tool for very low forces. Shaft size is 5 mm, for direct mounting into sensor.

Wire Hook Non-destructive 50μm S=5 mm

TOP031050 - Non-destructive pull tool for very low forces. Shaft size is 5 mm, for direct mounting into sensor.

Wire Hook Non-destructive 75μm S=5 mm

TOP031075 - Non-destructive pull tool for very low forces. Shaft size is 5 mm, for direct mounting into sensor.

Tool Holder Bayonet Interface D 5 mm

THP030001 -

Tool Holder Bayonet for Tool D 0,5 mm

THP031005 -

Tool Holder Bayonet for Tool D 1,2 mm

THP031012 -

Tool Holder D 5 mm 1,2 mm

THP000512 -

Tool Holder D 5 mm 0,5 mm Concentric

THP001505 -

Tool Holder TMU D 4.5 mm 1,2 mm

THP004512 -

Tool Holder Non Destructive D 5 mm 1,2mm

THP005512 - Toolholder with spring function for repeatability tests and non destructive tests. This toolholder is also suitable for mechanical tool protection. For forces greater then 10 gf.

Tool Holder ND 5 mm 1,2mm Exchangable

THP006512 - Toolholder with spring function for repeatability tests and non destructive tests. This toolholder is also suitable for mechanical tool protection. For forces greater then 10 gf.

Shear Tool shaft 1/16", width 25μm

TOS016025 - "Shaft diameter S= 1/16". The width of the tool tip W= 25μm. Shaft length L= 25,4mm. The depth of the tool tip D= 25μm."

Shear Tool shaft 1/16", width 35μm

TOS016035 - "Shaft diameter S= 1/16". The width of the tool tip W= 35μm. Shaft length L= 25,4mm. The depth of the tool tip D= 35μm."

Shear Tool shaft 1/16", width 50μm

TOS016050 - "Shaft diameter S= 1/16". The width of the tool tip W= 50μm. Shaft length L= 25,4mm. The depth of the tool tip D= 50μm."

Shear Tool shaft 1/16", width 75μm

TOS016075 - "Shaft diameter S= 1/16". The width of the tool tip W= 75μm. Shaft length L= 25,4 mm. The depth of the tool tip D= 75μm."

Shear Tool shaft 1/16", width 100μm

TOS016100 - "Shaft diameter S= 1/16". The width of the tool tip W= 100μm. Shaft length L= 25,4mm. The depth of the tool tip D= 100μm."

Shear Tool shaft 1/16", width 150μm

TOS016150 - "Shaft diameter S= 1/16". The width of the tool tip W= 150μm. Shaft length L= 25,4mm. The depth of the tool tip D= 100μm."

Shear Tool shaft 1/16", width 200μm

TOS016200 - "Shaft diameter S= 1/16". The width of the tool tip W= 200μm. Shaft length L= 25,4mm. The depth of the tool tip D= 100μm."

Shear Tool shaft 1/16", width 300μm

TOS016300 - "Shaft diameter S= 1/16". The width of the tool tip W= 300μm. Shaft length L= 25,4mm. The depth of the tool tip D= 100μm."

Shear Tool shaft 1/16", width 400μm

TOS016400 - "Shaft diameter S= 1/16". The width of the tool tip W= 400μm. Shaft length L= 25,4mm. The depth of the tool tip D= 200μm."

Shear Tool shaft 1/16", width 600μm

TOS016600 - "Shaft diameter S= 1/16". The width of the tool tip W= 600μm. Shaft length L= 25,4mm. The depth of the tool tip D= 200μm. "

Shear Tool shaft 1/8", width 400μm

TOS032004 - "Shaft diameter S= 1/8". The width of the tool tip W= 400μm. Shaft length L= 25,4mm. The depth of the tool tip D= 200μm. "

Shear Tool shaft 1/8", width 600μm

TOS032006 - "Shaft diameter S= 1/8". The width of the tool tip W= 600μm. Shaft length L= 25,4mm. The depth of the tool tip D= 200μm."

Shear Tool shaft 1/8", width 800μm

TOS032008 - "Shaft diameter S= 1/8". The width of the tool tip W= 800μm. Shaft length L= 25,4mm. The depth of the tool tip D= 200μm."

Shear Tool shaft 1/8", width 1000μm

TOS032010 - "Shaft diameter S= 1/8". The width of the tool tip W= 1000μm. Shaft length L= 25,4mm. The depth of the tool tip D= 200μm."

Shear Tool shaft 1/8", width 1500μm

TOS032015 - "Shaft diameter S= 1/8". The width of the tool tip W= 1500μm. Shaft length L= 25,4mm. The depth of the tool tip D= 500μm."

Shear Tool shaft 1/8", width 2000μm

TOS032020 - "Shaft diameter S= 1/8". The width of the tool tip W= 2000μm. Shaft length L= 25,4mm. The depth of the tool tip D= 500μm."

Shear Tool shaft 1/8", width 3000μm

TOS032030 - "Shaft diameter S= 1/8". The width of the tool tip W= 3000μm. Shaft length L= 25,4mm. The depth of the tool tip D= 500μm."

Shear Tool shaft 5mm, width 4mm

TOS050040 - Shaft diameter S= 5mm. The width of the tool tip W= 4000μm. Shaft length L= 25,4mm. The depth of the tool tip D= 2mm.

Shear Tool shaft 5mm, width 6mm

TOS050060 - Shaft diameter S= 5mm. The width of the tool tip W= 6mm. Shaft length L= 32,5mm. The depth of the tool tip D= 2mm.

Shear Tool shaft 5mm, width 8mm

TOS050080 - Shaft diameter S= 5mm. The width of the tool tip W= 8mm. Shaft length L= 32,5mm. The depth of the tool tip D= 2mm.

Shear Tool shaft 5mm, width 10mm

TOS050100 - Shaft diameter S= 5mm. The width of the tool tip W= 10mm. Shaft length L= 32,5mm. The depth of the tool tip D= 2mm.

Shear Tool shaft 5mm, width 13mm

TOS050130 - Shaft diameter S= 5mm. The width of the tool tip W= 13mm. Shaft length L= 32,5mm. The depth of the tool tip D= 2mm.

Shear Tool shaft 7mm, width 4mm

TOS070040 - Shaft diameter S= 7mm. The width of the tool tip W= 4mm. Shaft length L= 40mm. The depth of the tool tip D= 2,5mm.

Shear Tool shaft 7mm, width 6mm

TOS070060 - Shaft diameter S= 7mm. The width of the tool tip W= 6mm. Shaft length L= 40mm. The depth of the tool tip D= 2,5mm.

Shear Tool shaft 7mm, width 8mm

TOS070080 - Shaft diameter S= 7mm. The width of the tool tip W= 8mm. Shaft length L= 40mm. The depth of the tool tip D= 2,5mm.

Shear Tool shaft 7mm, width 10mm

TOS070100 - Shaft diameter S= 7mm. The width of the tool tip W= 10mm. Shaft length L= 40mm. The depth of the tool tip D= 2,5mm.

Shear Tool shaft 7mm, width 13mm

TOS070130 - Shaft diameter S= 7mm. The width of the tool tip W= 13mm. Shaft length L= 40mm. The depth of the tool tip D= 2,5mm.

Shear Tool shaft 12mm, width 8mm

TOS120080 - Shaft diameter S= 12mm. The width of the tool tip W= 8mm. Shaft length L= 60mm. The depth of the tool tip D= 2,5mm.

Shear Tool shaft 12mm, width 10mm

TOS120100 - Shaft diameter S= 12mm. The width of the tool tip W= 10mm. Shaft length L= 60mm. The depth of the tool tip D= 2,5mm.

Shear Tool shaft 12mm, width 12mm

TOS120120 - Shaft diameter S= 12mm. The width of the tool tip W= 12mm. Shaft length L= 60mm. The depth of the tool tip D= 2,5mm.

Shear Tool shaft 12mm, width 14mm

TOS120140 - Shaft diameter S= 12mm. The width of the tool tip W= 14mm. Shaft length L= 60mm. The depth of the tool tip D= 2,5mm.

Shear Tool shaft 12mm, width 20 mm

TOS120200 - Shaft diameter S= 12mm. The width of the tool tip W= 20mm. Shaft length L= 60mm. The depth of the tool tip D= 2,5mm.

Shear Tool S5mm W2mm L60mm D0,2mm

TOS090051 -

Shear Tool S7mm, Round Tip 1,5 mm

TOS090053 -

Shear Tool Deep Access S7mm W1,4mm L25mm

TOS090056 -

Shear Tool 1/8" Width 3,2x1,4 mm cut out

TOS090060 -

Shear Tool S=5mm, W=2mm, D=400

TOS090062 -

Tool Holder D 5 mm 1,6 mm

THS000516 -

Tool Holder D 5 mm 3,2 mm

THS000532 -

Tool Holder D 7 mm 1,6 mm

THS000716 -

Tool Holder D 7 mm 3,2 mm

THS000732 -

Tool adaptor 12-7/12-5 mm

TAS000001 - Tool adaptor for SMU 500N. With this universal tool adaptor it is possible to use shear tools with a shaft diameter of 5 mm and 7 mm in a SMU Shear Measurement Unit 500N.

Stud lift tool M3

TOL000003 -

Stud lift tool M4

TOL000004 -

Stud lift tool M5

TOL000005 -

Stud lift tool M6

TOL000006 -

Stud lift tool M8

TOL000008 -

Studpull lifter

THL000001 -

Lift Tool Holder M6 1,2mm

THL001612 -

Studpull holder M6:M6 Rotator

TAL000201 - Only for pull test in LMU

Studpull holder M6:M6

TAL000001 -

Studpull holder M5:M6

TAL000002 -

Studpull holder D5mm:M6

TAL000003 -

Set of Tweezer tips Cavity 760

TOT005760 -

Electrical actuated Tweezer XEM/1

TOT000104 - Stand alone, USB operated, electrical tweezer

XEM Tweezer Tip set flat W=200μm D=50

TOT012001 -

XEM Tweezer Tip set Rough W=200μm D=50

TOT012002 -

XEM Tweezer Tip set 3-T W=200μm D=50

TOT012003 -

XEM Tweezer Tip set 5-T W=200μm D=50

TOT012004 -

XEM Tweezer Tip set 7-T W=200μm D=50

TOT012005 -

XEM Tweezer Tip set 10-T W=200μm D=50

TOT012006 -

XEM Tweezer Tip set cavity 200

TOT015200 -

XEM Tweezer Tip set cavity 300

TOT015300 -

XEM Tweezer Tip set cavity 600

TOT015600 -

XEM Tweezer Tip set cavity 800

TOT015800 -

Mechanical actuated Tweezer KHG/3

TOT000201 - For wire > 200 micron For peel test. Excluded tips. Tip interface is 1,5 mm. Tweezer to sensor Interface is M6 outer-thread.

KGH Tweezer Tip set high load 2 mm

TOT006002 - For KHG/3 Mechanically actuated Tweezer.

KGH Tweezer Tip set high load 4 mm

TOT006004 - For KHG/3 Mechanically actuated Tweezer.

KGH Tweezer Tip set high load 10 mm

TOT006010 - For KHG/3 Mechanically actuated Tweezer. For peel tests.

Tool Adaptor Manual Tweezer Rotator

TAT000101 - Tool adaptor for Measurement Unit. In this tool adaptor a tweezer can be mounted and rotated by hand over an angle of 270μ. For example to positioning the tweezer over a wire and cut it.

Contact us

Did we catch your attention? Please contact us for more information or to request a demonstration or a quotation.