Product catalog » workholders

Universal Symmetric work holder

XWU001005 - Including step jaws and rotation disc.

Universal Asymmetric work holder

XWU001006 - Including step jaws and rotation disc.

Jaw Set Extension univ. work holder

XWU001107 - Extension jaw set for XWU001006.

Jaw Set SST for univ. work holder

XWU001105 - Stainless steel jaws for XWU001005 und XWU001006.

Jaw Set with straight edges

XWU001109 - Jaws with straight edges for XWU001005 and XWU001006.

Jaw Set customized for univ. work holder

XWU001106 - Jaws for XWU001005 and XWU001006. Customized for 200 kgf die shear tests.

Jaw Set customized for CCD chip clamping

XWU001108 - Jaws for XWU001005 and XWU001006. Customized jaws with flat surface for placing large chips. Jaws are made for die shear test up to 200 kgf.

Vacuum universal work holder 140x140 mm

XWU002140 -

Vacuum universal work holder 140x180 mm

XWU002180 -

Universal work holder, magnetic holders

XWU003003 - For fragile and/or flexible samples.

Clamper work holder Universal 70 mm

XWC070001 - Universal clamper work holder. Provided with vacuum clamping option. Customized masks and inlays available. Maximum sample size: Width 70 mm, Hight 0-10 mm, Length undefined. Excluded standard mask and inlay.

Clamper Mask standard 70 mm

XWC070011 - Standard Mask for XWC070001 Clamper work holder Universal 70 mm.

Clamper Insert standard 70 mm

XWC070012 - Standard Insert for Universal clamper work holder 70 mm.

Clamper Horizontal Mask 18 x 10 cm

XWC091001 - Clamper for EURO sized PCB's.

Shuffle Plate diameter 325 mm

XWM002101 - For shuffle work holder. Can be mounted directly on XY mounting table. No T-nuts needed.

Vacuum Shuffle Base

XWM002004 - Vacuum shuffle base for XWM002101 shuffle plate. Easy movement by compressed air. Firm clamping by vacuum.

Interface Disc for work holder

XWM003002 -

Interface Inner disc for work holder

XWM003005 -

Interface Clamper Plate for work holder

XWM003008 -

Interface Base Vacuum Work Holder H=30mm

XWM004006 - Work holder base with vacuum facility for Vacuum Work holder.

Interface Base Vacuum Work Holder H=60mm

XWM004007 - Work holder base with vacuum facility for Vacuum Work holder.

Interface Base Vacuum Work Holder H=90mm

XWM004008 - Work Holder base with vacuum facility for Vacuum Work Holder.

Offset X / Y Base 75 mm

XWM004011 - For 75 mm extension of XWX000304 Manual X/Y stage.

Base adjustable angle

XWM004510 - For testing samples with a preset angle.

Wafer chuck 8"

XWW001008 -

Wafer chuck 12"

XWW001012 -

Wafer chuck adjustable stop

XWW005001 -

Wafer chuck end stop

XWW005011 -

Wafer chuck quick clamp

XWW005021 - With rubber clamp to hold wafer firmly.

Motorized Rotating interface

XWR000001 - Motorized rotating interface for work holders.

Heater clamper work holder

XWH000006 - Heating surface is 50 x 50 mm. The maximum heating temperature is 500 μC. Internal fans take care of the cooling from the workholder housing.

Clamper Total Ball Shear Fixed base

XWA001200 - Total Ball shear clamper vacuum with inserts (XWA001201) for different substrates. Maximum substrate width: 90 mm. Direct fixation on mounting table for the best stability.

Clamper Total Ball Shear Rotation base

XWA001220 - Total Ball shear clamper vacuum with inserts (XWA001201) for different substrates. Maximum substrate width: 90 mm. Direct mounting on interface base. Rotation possible.

Insert for Clamper Total Ball Shear

XWA001201 - Insert for Clamper Total Ball Shear XWA001200 and XWA001220 according to customer specifications.

Fixture Grid 40x110 mm

XWG000001 -

Fixture Grid 65x110 mm

XWG000002 -

Fixture Grid 95x140 mm

XWG000003 -

Fixture Grid 280x180mm univ. work holder

XWG000004 -

Fixture Grid 280x180 mm for base

XWG000005 -

Clamper M3/M3 Length 30 mm

XWG000401 - Clamper for M3 grid. With M3 tip. Total length 30 mm.

Clamper M3/M2 Lenght 50 mm

XWG000402 - Clamper for M3 grid. With M2 tip. Total length 50 mm.

Clamper M3 short pointed

XWG000403 - Clamper for M3 grid.

Clamper M3/M2 Length 75 mm

XWG000413 - Clamper for M3 grid. With M2 tip. Total length 75 mm.

Manual X Stage

XWX000503 - Maximum travel X stage 250 mm.

Work holder for Bending + Probe

XWB000005 -

Bending Probe

XWB080011 -

Work holder for bending and/or breaking

XWB000001 - Work holder for bending and/or breaking ceramics, solar cells (silicon chips) and PCB's.

Work holder for breaking

XWB000002 - Work holder for breaking ceramics and wafers.

Peel Work holder Clamper small

XWP000001 - Slide 90μ peel direction.

Peel Work holder Clamper large

XWP000002 - Slide 90μ peel direction.

Peel Work holder Solar Cell

XWP000004 - Solar Peel work holder included 1 cassette.

Clamper work holder Manual XY 171x43 cm

XWS000302 - Clamper work holder for PCB's, mounted on a manual X/Y stage. Movement distance X direction 360 mm, step distance 30 mm. Movement distance Y direction 16 mm, step distance 16 mm. The clamping table, respectively X x Y size, is 431 long and 171 mm wide.

Contact us

Did we catch your attention? Please contact us for more information or to request a demonstration or a quotation.