Aluminium wedge
Aluminium wedge

Wedge and ribbon shear

  • Shear test from a few grams up to 500kgf
  • Sensor accuracy ±0.075%
  • Shear height accuracy ±1µm
  • Complies with industry standards

Ribbon shear test for copper ribbon up to 500kgf

Ribbon shear
Ribbon shear

Wedge shear test and wire pull tests are used to assess the quality of bonded aluminium or copper wire and ribbons. The wedge shear test is comparable to other shear tests. After an automatic touchdown, the Z-stage will move up with the predefined shear height. This touchdown and the shear height must be very accurate to make sure that the measurement results are correct and the IMC is not damaged or smeared.

Equally important is the shear tool. Due to the high forces that can occur during this test, the tool must be adapted to the wedge. XYZTEC can offer standard tools and customized deep access tools. This test is used by companies that produce microwave, high frequency, power, automotive, hybrid and solar devices.

Contact us

Did we catch your attention? Please contact us for more information, to request a demonstration or a quotation.

© 1999-2016 XYZTEC BV Disclaimer, Privacy, Cookies
Technology leader in bond testing worldwide