Condor Sigma » Specifications

A bondtester that can grow with your company

The Condor Sigma series has broad specifications as you will find below. It has a maximum force capability of 200 kgf shear and 200 kgf push or pull, fast moving 370 mm X-stage and an unparalleled 0.075% accuracy.

However, it is also possible to select a system that goes up to 100 kgf shear and 10 kgf push or pull and is fully upgradeable later. With Condor Sigma Lite XYZTEC gives you a low cost entry point without sacrificing performance to meet future demands.

The Condor Sigma W12 version was specifically designed for 300mm wafer testing. If your application requires forces higher than listed below, check out the Condor 150HF (high force) which offers an extreme specification of 500 kgf.

The production process is ISO9001, ISO13485 and ISO14001 certified.


Specifications

Sigma Lite Sigma Sigma W12 Sigma MAG Sigma HF Sigma XL Sigma HF
Force sensors Sigma Lite Sigma Sigma W12 Sigma MAG Sigma L Sigma XL Sigma HF
Revolving Measurement Unit (RMU) max. 6 sensors up to 200kgf 200kgf 10kgf 200kgf 200kgf 200kgf Not available on this model
Single Measurement Unit (SMU) 1 sensor up to 200kgf 200kgf 10kgf 200kgf 200kgf 200kgf 1000kgf
Rotational shear forces up to 10kgf 10kgf 10kgf 10kgf 10kgf 10kgf 1000kgf
Shear, pull, push forces up to 10kgf (10gf, 100gf, 1kgf, 10kgf) Standard Standard Standard Standard Standard Standard Not available on this model
Shear, pull, push forces up to 200kgf (100kgf, 200kgf) Standard Standard Not available on this model Standard Standard Standard Not available on this model
Shear, pull, push forces up to 1000kgf (500kgf, 1000kgf) Not available on this model Not available on this model Not available on this model Not available on this model Not available on this model Not available on this model Standard
Shear sensor deep access 54mm 54mm 54mm 54mm 54mm 54mm 80mm
Up to 6 Tweezers (USB, Mechanical, Pneumatic actuation) Optional Optional Optional Optional Optional Optional Not available on this model
 
Stages Sigma Lite Sigma Sigma W12 Sigma MAG Sigma L Sigma XL Sigma HF
X-stage 168mm 370mm 500mm 600mm 500mm 500mm 500mm
Y-stage 168mm 168mm 370mm 168mm 500mm 800mm 500mm
Z-stage 168mm 168mm 90mm 168mm 200mm 200mm 200mm
Axis speed 5mm/s 50mm/s 50mm/s 50mm/s 500mm/s 500mm/s 500mm/s
Resolution linear encoders 30nm 30nm 30nm 30nm 10nm 10nm 10nm
No trade-off between axis speed and force Standard Standard Standard Standard Standard Standard Standard
Backlash free direct drive (no gear box) Standard Standard Standard Standard Standard Standard Standard
13500W 518x513mm heater stage Not available on this model Not available on this model Optional Not available on this model Not available on this model Not available on this model Not available on this model
 
Accuracy Sigma Lite Sigma Sigma W12 Sigma MAG Sigma L Sigma XL Sigma HF
Accuracy 0,2% 0,075% 0,075% 0,075% 0,075% 0,075% 1%
ADC resolution 16 bit 24 bit 24 bit 24 bit 24 bit 24 bit 24 bit
Sampling frequency 2 kHz 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz 10 kHz
Stepback accuracy ±1 µm Standard Standard Standard Standard Standard Standard Standard
Programmable landing force down to 2,5 gf Standard Standard Standard Standard Standard Standard Standard
1° sensor rotation resolution Standard Standard Standard Standard Standard Standard Standard
Software tool concentricity correction ±5 µm Standard Standard Standard Standard Standard Standard Standard
Tool rotation accuracy ±10 µm Standard Standard Standard Standard Standard Standard Standard
Digital temperature correction Standard Standard Standard Standard Standard Standard Standard
ADC with flat pass band filter Standard Standard Standard Standard Standard Standard Standard
Frictionless pull and shear sensors Standard Standard Standard Standard Standard Standard Standard
Automatic electromagnetic damping Standard Standard Standard Standard Standard Standard Standard
 
Accessories Sigma Lite Sigma Sigma W12 Sigma MAG Sigma L Sigma XL Sigma HF
Perpendicular cameras (High resolution CMOS 6,41 MP) 3 3 3 3 3 3 Not available on this model
Head mounted cameras (no tool-camera-offset) Not available on this model Not available on this model Not available on this model Not available on this model Not available on this model Not available on this model 5
LED snake light Standard Optional Standard Optional Optional Optional Optional
LED ring illumination Optional Standard Optional Standard Standard Standard Standard
Full automation Optional Optional Standard Optional Optional Optional Optional
Fiducial recognition Optional Optional Standard Optional Optional Optional Optional
Barcode reader Standard Standard Standard Standard Standard Standard Standard
Customized (heated) workholders Standard Standard Standard Standard Standard Standard Standard
Magazine handler (Leadframe loader) integration Not available on this model Optional Not available on this model Standard Not available on this model Not available on this model Not available on this model
Wafer handler (Equipment Front End Module, EFEM) integration Not available on this model Optional Optional Not available on this model Optional Optional Not available on this model
Waffle tray handler (loader) integration Not available on this model Not available on this model Not available on this model Standard Not available on this model Not available on this model Not available on this model
Keyboard drawer Standard Standard Standard Standard Not available on this model Not available on this model Not available on this model
(Dual) monitor support optional with touch screen Optional Standard Standard Standard Standard Standard Standard
Monitor stowing position Standard Standard Standard Standard Standard Standard Standard
Onboard tool storage Optional Optional Optional Optional Optional Optional Optional
Blower and vacuum tool cleaning unit  Optional Optional Optional Optional Optional Optional Optional
CBP Jaw Cleaner (contactless) Optional Optional Optional Optional Optional Optional Not available on this model
 
Software Sigma Lite Sigma Sigma W12 Sigma MAG Sigma L Sigma XL Sigma HF
Supports Microsoft Windows 10™, 8™, 7™, 32 and 64 bit systems Standard Standard Standard Standard Standard Standard Standard
Easy to learn intuitive graphical user interface Standard Standard Standard Standard Standard Standard Standard
Minimum number of mouse clicks Standard Standard Standard Standard Standard Standard Standard
Customizable screens (wide and touch) Standard Standard Standard Standard Standard Standard Standard
Integrated report editor and data export Standard Standard Standard Standard Standard Standard Standard
Easy data sorting, grouping and filtering Standard Standard Standard Standard Standard Standard Standard
Integrated SPC and system GR&R analysis Standard Standard Standard Standard Standard Standard Standard
Multiple languages, multiple user network environment Standard Standard Standard Standard Standard Standard Standard
Export to XLS, DOC, PPT, PDF, XPS, CSV, XML, DBF, KLARF, INF, etc. Standard Standard Standard Standard Standard Standard Standard
Vision enhanced materials testing Optional Optional Optional Optional Optional Optional Optional
Automated Optical Inspection (AOI), image measurement, auto grading Not available on this model Optional Optional Optional Optional Optional Optional
SECS/GEM* Optional Optional Optional Optional Optional Optional Optional
MES* Optional Optional Optional Optional Optional Optional Optional
 
Other specifications Sigma Lite Sigma Sigma W12 Sigma MAG Sigma L Sigma XL Sigma HF
Synchronized digital inputs Standard Standard Standard Standard Standard Standard Standard
Synchronized digital and analogue outputs Standard Standard Standard Standard Standard Standard Standard
Tool protection in all directions Standard Standard Standard Standard Standard Standard Standard
Quick release workholders Standard Standard Standard Standard Standard Standard Standard
Rigid and durable frame Standard Standard Standard Standard Standard Standard Standard
Covers quickly and easily removed for maintenance Standard Standard Standard Standard Standard Standard Standard
Debris management Standard Standard Standard Standard Standard Standard Standard
Excellent correlation with other testing systems Standard Standard Standard Standard Standard Standard Standard
Compatible with existing tools, workholders, jigs Standard Standard Standard Standard Standard Standard Standard
Ergonomic layout to SEMI S8 Standard Standard Standard Standard Standard Standard Standard
Two ergonomic joysticks with 6 buttons each Standard Standard Standard Standard Standard Standard Standard
Microscope moves in focal arc and swivels to side for easy access Standard Standard Standard Standard Not available on this model Not available on this model Not available on this model
Microscope adjustable in X & Y and throught complete Z travel Standard Standard Standard Standard Not available on this model Not available on this model Not available on this model
EMC compliant Standard Standard Standard Standard Standard Standard Standard
CE compliant Standard Standard Standard Standard Standard Standard Standard
Semi S2 safety cabinet Not available on this model Optional Optional Optional Standard Standard Standard
ISO9001, ISO13485 and ISO14001 certified production Standard Standard Standard Standard Standard Standard Standard
Calibration jigs with maximized lever arm lengths Optional Optional Optional Optional Optional Optional Optional
Calibration weights OIMI class M1 or NIST class 1 Optional Optional Optional Optional Optional Optional Optional
1 Phase 100-240VAC 1+N+PE 45-64Hz 5A Standard Standard Standard Standard Standard Standard Standard
3 Phase 207-528VAC 3+N+PE 50-60Hz 8A Not available on this model Not available on this model Not available on this model Not available on this model Standard Standard Standard
Compressed air required Not available on this model Not available on this model Not available on this model Standard Not available on this model Not available on this model Standard
 
Mechanical Sigma Lite Sigma Sigma W12 Sigma MAG Sigma L Sigma XL Sigma HF
Footprint X  620mm 620mm 1300mm 1800mm 1200mm 1200mm 1200mm
Footprint Y 558mm 558mm 935mm 900mm 1200mm 2400mm 1200mm
Height 608mm 608mm 608mm 1100mm 2000mm 2000mm 2000mm
Weight ±80kg ±80kg ±100kg ±160kg ±1350kg ±1800kg ±1350kg

 

Standard Standard
Optional Optional
Not available Not available


* Contact XYZTEC for more information and options for your factory.

Specifications subject to change without prior notice.


Condor Sigma series and ergonomics

Click here to learn about the ergonomics of the Condor Sigma.


Contact us

Did we catch your attention? Please contact us for more information or to request a demonstration or a quotation.


© 1999-2016 XYZTEC BV Disclaimer, Privacy, Cookies
Home
News
Condor Sigma
Condor 150HF
Test types
Markets & solutions
Sales & support
Downloads
Events
Shop

XYZTEC Netherlands

J.F. Kennedylaan 14-B
5981 XC Panningen
Netherlands (map / route)

Tel: +31-77-3060920
Fax: +31-77-3060919

Find your local representative

XYZTEC Germany

Schäferei 18
06237 Leuna
OT Günthersdorf
Germany
(map / route)
Tel: +49-34638-666690
Fax: +49-34638-666695
Cell: +49-152-21722629
Email: Volker Loibl

Find other office locations

Technology leader in bond testing worldwide