Newsletter: SMD gull wing leads testing

29 April 2016

Straightforward pull test

It is possible to do regular pull tests on SMD gull wing leads using a hook. However, there are three problems with that approach, namely:

  • There is very little space to get the hook in to pull a lead.
  • The body supports the lead being tested.
  • When the hook is a tight fit under the lead, in the test method the sensor must not be nulled/zeroed before the test; it must be manually nulled before the alignment.

Because the hook is closer to the package than the pad, a lot of the test load goes into the package rather than the bond of interest. However, a weak lead to pad bond will still give a lower result and failure mode analysis of the tested bond will show poor soldering.

A strong wire hook is required. XYZTEC can support you with extra strong hooks that will withstand relatively high forces.

The best test

Best test on SMD gull wing leads
Best test on SMD gull wing leads

The best way to test the bond of an SMD gull wing lead is to cut the body from the leads and then test each lead with a tweezer pull sensor. This way, the bond is tested with no effects from the body and the other leads. The downside of this approach is the preparation time involved.

Other solutions without cutting the body off

Vector pull loads the bond of interest with a higher force
Vector pull loads the bond of interest with a higher force

To minimize the effect the body has supporting the bond it may be better to use a vector pull than a regular wire pull, using a special hook and a shear sensor. This also allows the hook to be made stronger but it might still be weaker than the lead, depending on the clearance under the lead for the hook. With a vector pull, a higher test load is applied to the bond pad than with the regular wire pull.

Another method is to incline the sample. Using this approach, one can still use a regular pull sensor in combination with a strong wire hook. This has the following limitations, though:

  • It may not be possible with large samples because they hit the bond tester head or frame.
  • Focusing a microscope at different test heights may not be possible or can reduce the number of tests per hour.
  • Sample must be rotated to test all sides of the component.
  • Handling and clamping an inclined sample can be difficult.
Inclined work holder
Inclined work holder

How to test bonds?

As market leader in bondtesting in Europe and Taiwan, XYZTEC has a lot of experience with many different types of samples and test types. The thoughts in this newsletter on SMD gull wing leads are just one example. We aim to spread knowledge about bond testing in the industry.

We currently offer how-to's on Cold Bump Pull (CBP) and Wire Pull and we intend to expand it into other test types as well in the future. Additionally, you can find here the text of the relevant MIL-STD-883 standards in accessible HTML format. If you are interested in a live demonstration of the Condor Sigma on your sample or perhaps for more bond testing inspiration, contact us today!

Watch bondtesting being automated

Click here to watch our automation video or here to watch the video of the patented CBP Jaw Cleaner.

Subscribe

Your name:

Your email:


Other newsletters

Jul 2017 Advances in Thin, 3D and MEMS Die Bond Strength Testing
May 2017 Shear testing copper pillar
Mar 2017 Fracture strength of thin wafers and die
Feb 2017 Centralized database for enhanced security and SPC options
Jan 2017 Full Automation with Improved Pattern Recognition, Fiducial Marks Analysis, Wire Detect and Failure Mode Analysis
Dec 2016 Coating and film testing
Nov 2016 Latest software release enables automatic grading
Oct 2016 Vision enhanced materials testing
Sep 2016 XYZTEC makes lid pull easy
Aug 2016 Condor Sigma W12 with large heater stage
Jul 2016 How to: Wire Pull
Jun 2016 Get 10% off your next tools order
May 2016 Pull testing bumped wafers
Apr 2016 SMD gull wing leads testing
Mar 2016 Automation: matrix bond testing made easy
Feb 2016 Fully integrated solution for automated wafer testing
Jan 2016 In bond testing, size does matter
Dec 2015 XYZTEC goes from strength to strength
Nov 2015 Automatic wire detect
Oct 2015 Highly reproducible stud pull tests are possible
Sep 2015 What is the quality of your coatings?
Aug 2015 Loading samples has never been so easy
Jul 2015 Axis accuracy of ±1µm: essential for automatic bond testing
Jun 2015 Increase your bondtesting throughput
May 2015 USB Tweezers

Subscribe to our RSS-feed to be notified of the latest news automatically. You can also find us on Facebook, LinkedIn, Twitter, Weibo 微博, Google+, YouKu 优酷 and YouTube.



Bond testing seminars

Aiming to improve understanding of bond testing in the industry, XYZTEC organizes seminars to present and disseminate knowledge in a straightforward format. Click here to find out more about bond testing seminars.


© 1999-2016 XYZTEC BV Disclaimer, Privacy, Cookies
Home
News
Condor Sigma
Condor 150HF
Test types
Markets & solutions
Sales & support
Downloads
Events
Shop

XYZTEC Netherlands

J.F. Kennedylaan 14-B
5981 XC Panningen
Netherlands (map / route)

Tel: +31-77-3060920
Fax: +31-77-3060919

Find your local representative

XYZTEC Germany

Schäferei 18
06237 Leuna
OT Günthersdorf
Germany
(map / route)
Tel: +49-34638-666690
Fax: +49-34638-666695
Cell: +49-172-3272991

Find other office locations

Technology leader in bond testing worldwide