Cavity shear test

  • Increases test values
  • Minimizes ball deformation
  • Minimizes test influence on bond strength
  • Sensor accuracy ±0.075%
  • Enables testing with increased shear height

Ideal solution for testing Ultra Fine Pitch Gold Balls

Standard shear versus cavity shear
Standard shear versus cavity shear

Cavity Shear tools have a semi-cylindrical recess (cavity) that distributes the shear load on a ball over a much larger surface area. This reduces ball deformation and increases the test result values. Although the test result increases, it also promotes more bond (IMC) failures. This occurs because the ball is not progressively deformed and sheared by the high stress concentrations produced by standard shear. More bond failures provide more data on the strength of the bond rather than the shear strength of gold.

The passivation layer in Ultra Fine Pitch applications often limits the shear height causing low test results as the tool simply cuts the top off the bond. Cavity Shear minimizes this affect by distributing the test load over the ball. The advantages of Cavity Shear also apply to Solder Ball applications.


Contact us

Did we catch your attention? Please contact us for more information, to request a demonstration or a quotation.


© 1999-2016 XYZTEC BV Disclaimer, Privacy, Cookies
Home
News
Condor Sigma
Condor 150HF
Test types
Markets & solutions
Sales & support
Downloads
Events
Shop

XYZTEC Netherlands

J.F. Kennedylaan 14-B
5981 XC Panningen
Netherlands (map / route)

Tel: +31-77-3060920
Fax: +31-77-3060919

Find your local representative

XYZTEC Germany

Schäferei 18
06237 Leuna
OT Günthersdorf
Germany
(map / route)
Tel: +49-34638-666690
Fax: +49-34638-666695
Cell: +49-172-3272991

Find other office locations

Technology leader in bond testing worldwide