Home » KnowledgeCenter » Other tests » High speed impact
High speed testing is used for manufacturing and end-use failure mode analysis and quality assurance. Traditional low-speed testing (less than 10mm/s) will almost always result in a shear through the solder (ductile failure), which is usually not the failure mode of interest. Testing at higher speeds can produce other modes and more useful data. Such data is more relevant to the resistance of the bond to mechanical shock. It can supplement and even replace Board Level Drop Testing.
As the test speed is increased there is often a transition from ductile failure to brittle fracture in the IMC.
Адрес электронной почты: *
Local support and parts, global presence, world-class testers
J.F. Kennedylaan 14b5981 XC PanningenThe Netherlands
Schäferei 1806237 LeunaOT GünthersdorfGermany
33 South Main St. Unit #1
PO box 2189
Wolfeboro, NH 03894
72/7 M.12 Soi. SoonthornwipakBangpla, Bangphli,10540 Samut PrakanThailand
No. 157, Zhongzheng 6th St., Hukou Township, Hsinchu County 303, Taiwan (R.O.C.)
Room 2012 Haichuang Mansion, No.288 Dengyun Road, High-tech district, Kunshan, Jiang Su, China
Create a PDF from the
Contact your localrepresentative
Follow us on:
© 2019 xyztec bv
Xyztec develops world-class bond testing technologies and works together with global partners to provide local support worldwide.