29 НОЯБРЬ 2015
As more and more companies are making the transition to automatic wire pull testing, the engineers are also finding out its limitations. On many products, the placement of wires is not consistent and simple automation programs will miss the wire or pull two wires at once. XYZTEC's Condor Sigma is the only bond tester in the world to overcome this problem with its automatic wire detect functionality.
The Condor Sigma high resolution cameras combined with advanced wire detect algorithms allow the bondtester to correct for production tolerances for every single wire and allow for automation, even with fine pitch wires. Additionally, the Sigma offers automatic and consistent positioning along the wire, which can be setup as a percentage between the first and second bond. Alternatively the pull position may be calculated to produce any required angle at either the first or second bond and the forces at both bonds calculated. Missing wires or recognition problems can be handled during the automation cycle or after, via extensive reports.
The system is surprisingly easy to use, with a flexible AOI editor. Positions can be taught by means of the microscope (3D) and/or any of the three cameras that can be fitted on the Condor Sigma. Wire detect is one of many image processing capabilities of the Sigma. The automatic wire detect function was introduced at Productronica in Germany and is most relevant to automotive customers, hybrids, LTC, COB, leadframes and strips with multiple wires.
Contact us to see what is possible on your samples.
|ИЮЛ 2019||Meet the world’s biggest bond testers|
|АПР 2019||Free SMTconnect ticket? Register now|
|АВГ 2018||Is Fully Automatic Bond Testing Possible?|
|ИЮЛ 2017||Advances in Thin, 3D and MEMS Die Bond Strength Testing|
|МАЙ 2017||Shear testing copper pillar|
|МАР 2017||Fracture strength of thin wafers and die|
|ФЕВ 2017||Centralized database for enhanced security and SPC options|
|ЯНВ 2017||Full Automation with Improved Pattern Recognition, Fiducial Marks Analysis, Wire Detect and Failure Mode Analysis|
|ДЕК 2016||Тестирование покрытий и пленок|
|НОЯ 2016||Latest software release enables automatic grading|
|ОКТ 2016||Новые возможности в тестировании материалов|
|СЕН 2016||Тестирование изделия с крышкой на установке Condor Sigma|
|АВГ 2016||Новый нагреваемый вращающийся рабочий столик для установки Condor Sigma W12 имеет большую рабочую зону|
|ИЮЛ 2016||How to: Wire Pull|
|ИЮН 2016||Get 10% off your next tools order|
|МАЙ 2016||Pull testing bumped wafers|
|АПР 2016||SMD gull wing leads testing|
|МАР 2016||Automation: matrix bond testing made easy|
|ФЕВ 2016||Fully integrated solution for automated wafer testing|
|ЯНВ 2016||In bond testing, size does matter|
|ДЕК 2015||XYZTEC goes from strength to strength|
|НОЯ 2015||Automatic wire detect|
|ОКТ 2015||Highly reproducible stud pull tests are possible|
|СЕН 2015||What is the quality of your coatings?|
|АВГ 2015||Loading samples has never been so easy|
Aiming to improve understanding of bond testing in the industry, XYZTEC organizes seminars to present and disseminate knowledge in a straightforward format. Click here to find out more about bond testing seminars.