search

xyztec bv

How to: shear

How to: Shear This manual advises what to consider and how to perform an optimal shear test. The guide touches topics on shear tool design, tool quality, tool..

Cavity shear

Cavity shear Cavity Shear tools have a semi-cylindrical recess (cavity) that distributes the shear load on a ball over a much larger surface area. This reduces ball deformation..

Search results in xyztec

How to: shear

How to: Shear This manual advises what to consider and how to perform an optimal shear test. The guide touches topics on shear tool design, tool quality, tool..

Cavity shear

Cavity shear Cavity Shear tools have a semi-cylindrical recess (cavity) that distributes the shear load on a ball over a much larger surface area. This reduces ball deformation..

Search results in shop xyztec

Shear tool holder 1/8 ” tool to 7 mm interface

Shear tool holder 1/16 ” tool to 7 mm interface

Shear tool holder 1/8 ” tool to 5 mm interface

Shear tool holder 1/16 ” tool to 5 mm interface

Tool holder non-destructive for 0,5 mm tools to 5 mm interface

Pull tool holder for 3,2 mm tools to 5 mm interface

Pull adjustable tool holder for 0,5 mm tools to 5 mm interface

Pull tool holder for M2 interface tools to 5 mm interface

Pull tool holder for 1,6 mm tools to 5 mm interface

Pull tool holder for 1,2 mm tools to 5 mm interface

Shear sleeve 5 mm tool to 7 mm interface

Pull tool holder for 0,8 mm tools to 5 mm interface

Shear sleeve 5 mm or 7 mm tool to 12 mm interface

Shear tool shaft 12 mm, width 20 mm

Shear tool shaft 12 mm, width 14 mm

Shear tool shaft 12 mm, width 12 mm

Shear tool shaft 12 mm, width 10 mm

Shear tool shaft 12 mm, width 8 mm

Shear tool shaft 7 mm, width 13 mm

Shear tool shaft 7 mm, width 10 mm

Shear tool shaft 7 mm, width 8 mm

Shear tool shaft 7 mm, width 6 mm

Shear tool shaft 7 mm, width 4 mm

Shear tool shaft 5 mm, width 10 mm

Shear tool shaft 5 mm, width 13 mm

Shear tool shaft 5 mm, width 8 mm

Shear tool shaft 5 mm, width 6 mm

Shear tool shaft 5 mm, width 4 mm

Shear tool shaft 1/8 “, width 3 mm

Shear tool shaft 1/8 “, width 2 mm

Shear tool shaft 1/8 “, width 1,5 mm

Shear tool shaft 1/8 “, width 1 mm

Shear tool shaft 1/8 “, width 800 µm

Shear tool shaft 1/8 “, width 600 µm

Shear tool shaft 1/16 “, width 600 µm

Shear tool shaft 1/16 “, width 400 µm

Shear tool shaft 1/16 “, width 300 µm

Shear tool shaft 1/16 “, width 200 µm

Shear tool shaft 1/16 “, width 100 µm

Shear tool shaft 1/16 “, width 75 µm

Shear tool shaft 1/16 “, width 50 µm

Shear tool shaft 1/16 “, width 35 µm

Shear tool shaft 1/16 “, width 25 µm

Shear tool shaft 1/16 “, width 150 µm

Shear tool shaft 1/8 “, width 400 µm

Shear tool shaft 1/16 “, width 15 µm

Wire hook fine pitch D 25 µm, F 50 µm, L 55 mm, S 1,2 mm

Wire hook fine pitch D 50 µm, F 100 µm, L 55 mm, S 1,2 mm

Wire hook fine pitch D 75 µm, F 150 µm, L 55 mm, S 1,2 mm

Wire hook fine pitch D 100 µm, F 200 µm, L 55 mm, S 1,2 mm

Wire hook standard D 1100 µm, F 3300 µm, L 55 mm, S 1,2 mm

Wire hook standard D 1200 µm, F 3600 µm, L 55 mm, S 1,2 mm

Wire hook standard D 300 µm, F 900 µm, L 55 mm, S 1,2 mm

Wire hook standard D 400 µm, F 1200 µm, L 55 mm, S 1,2 mm

Wire hook standard D 500 µm, F 1500 µm, L 55 mm, S 1,2 mm

Wire hook standard D 1000 µm, F 3000 µm, L 55 mm, S 1,2 mm

Wire hook standard D 900 µm, F 2700 µm, L 55 mm, S 1,2 mm

Wire hook standard D 800 µm, F 2400 µm, L 55 mm, S 1,2 mm

Wire hook standard D 700 µm, F 2100 µm, L 55 mm, S 1,2 mm

Wire hook standard D 600 µm, F 1800 µm, L 55 mm, S 1,2 mm

Wire hook standard D 250 µm, F 750 µm, L 55 mm, S 1,2 mm

Wire hook standard D 200 µm, F 600 µm, L 55 mm, S 1,2 mm

Wire hook standard D 150 µm, F 450 µm, L 55 mm, S 1,2 mm

Wire hook standard D 50 µm, F 150 µm, L 55 mm, S 1,2 mm

Wire hook standard D 75 µm, F 225 µm, L 55 mm, S 1,2 mm

Wire hook standard D 100 µm, F 300 µm, L 55 mm, S 1,2 mm

Wire hook standard D 25 µm, F 75 µm, L 55 mm, S 1,2 mm

450 µm ball tweezer tip with back relief

350 µm ball tweezer tip with back relief

300 µm ball tweezer tip with back relief

250 µm ball tweezer tip with back relief

200 µm ball tweezer tip with back relief

Horizontal knife cutting tweezer tip

Vertical knife cutting tweezer tip

Thin wire 200 µm wide D 50 µm tweezer tip

5 tooth W=10 mm tweezer tip

5 tooth W=5 mm tweezer tip

5 tooth standard tweezer tip

3 tooth standard tweezer tip

750 µm Cold Bump Pull tweezer tip

700 µm Cold Bump Pull tweezer tip

650 µm Cold Bump Pull tweezer tip

600 µm Cold Bump Pull tweezer tip

550 µm Cold Bump Pull tweezer tip

500 µm Cold Bump Pull tweezer tip

450 µm Cold Bump Pull tweezer tip

400 µm Cold Bump Pull tweezer tip

350 µm Cold Bump Pull tweezer tip

300 µm Cold Bump Pull tweezer tip

250 µm Cold Bump Pull tweezer tip

200 µm Cold Bump Pull tweezer tip

150 µm Cold Bump Pull tweezer tip

115 µm Cold Bump Pull tweezer tip

100 µm Cold Bump Pull tweezer tip

80 µm Cold Bump Pull tweezer tip

50 µm Cold Bump Pull tweezer tip

Shear tool shaft 1/4 “, width 20 mm

Shear tool shaft 1/4 “, width 14 mm

Shear tool shaft 1/4 “, width 12 mm

Shear tool shaft 1/4 “, width 10 mm

Shear tool shaft 1/4 “, width 8 mm

Shear tool shaft 1/4 “, width 6 mm

Shear tool shaft 1/4 “, width 4 mm

Shear tool with back relief, shaft 3/16 “, width 3,5 mm

Shear tool shaft 3/16 “, width 3 mm

Shear tool shaft 3/16 “, width 2 mm

Shear tool shaft 3/16 “, width 1,5 mm

Shear tool shaft 3/16 “, width 800 µm

Shear tool shaft 3/16 “, width 1 mm

Shear tool shaft 3/16 “, width 600 µm

Shear tool shaft 3/16 “, width 400 µm

Shear tool with back relief, shaft 1/16 “, width 500 µm

Shear tool with back relief, shaft 1/16 “, width 325 µm

Shear tool with back relief, shaft 1/16 “, width 200 µm

Shear tool with back relief, shaft 1/16 “, width 125 µm

Shear tool with back relief, shaft 1/16 “, width 100 µm

Shear tool with back relief, shaft 1/16 “, width 75 µm

Shear tool with back relief, shaft 1/16 “, width 50 µm

Shear tool shaft 1/16 “, width 600 µm

Shear tool shaft 1/16 “, width 400 µm

Shear tool shaft 1/16 “, width 300 µm

Shear tool shaft 1/16 “, width 200 µm

Shear tool shaft 1/16 “, width 150 µm

Shear tool shaft 1/16 “, width 100 µm

Shear tool shaft 1/16 “, width 75 µm

Shear tool shaft 1/16 “, width 50 µm

Shear tool shaft 1/16 “, width 35 µm

Wire hook standard D 1200 µm, F 3600 µm, L 30 mm, S 1,2 mm

Wire hook standard D 1100 µm, F 3300 µm, L 30 mm, S 1,2 mm

Wire hook standard D 1000 µm, F 3000 µm, L 30 mm, S 1,2 mm

Wire hook standard D 900 µm, F 2700 µm, L 30 mm, S 1,2 mm

Wire hook standard D 800 µm, F 2400 µm, L 30 mm, S 1,2 mm

Wire hook standard D 700 µm, F 2100 µm, L 30 mm, S 1,2 mm

Wire hook standard D 600 µm, F 1800 µm, L 30 mm, S 1,2 mm

Wire hook standard D 500 µm, F 1500 µm, L 30 mm, S 0,5 mm (0.02 “)

Wire hook standard D 400 µm, F 1200 µm, L 30 mm, S 0,5 mm (0.02 “)

Wire hook standard D 300 µm, F 900 µm, L 30 mm, S 0,5 mm (0.02 “)

Wire hook standard D 250 µm, F 750 µm, L 30 mm, S 0,5mm (0.02 “)

Wire hook standard D 200 µm, F 600 µm, L 30 mm, S 0,5 mm (0.02 “)

Wire hook standard D 150 µm, F 450 µm, L 30 mm, S 0,5 mm (0.02 “)

Wire hook fine pitch D 25 µm, F 50 µm, L 30 mm, S 0,5 mm (0.02 “)

Wire hook fine pitch D 50 µm, F 100 µm, L 30 mm, S 0,5 mm (0.02 “)

Wire hook fine pitch D 75 µm, F 150 µm, L 30 mm, S 0,5 mm (0.02 “)

Wire hook fine pitch D 100 µm, F 200 µm, L 30 mm, S 0,5 mm (0.02 “)

Wire hook standard D 100 µm, F 300 µm, L 30 mm, S 0,5 mm (0.02 “)

Wire hook standard D 75 µm, F 225 µm, L 30 mm, S 0,5 mm (0.02 “)

Wire hook standard D 50 µm, F 150 µm, L 30 mm, S 0,5 mm (0.02 “)

Work holder interface plate Sigma

Pull non-adjustable tool holder for 1,2 mm tools for bayonet interface

Pull non-adjustable tool holder for 0,5 mm tools for bayonet interface

Pull adjustable tool holder for 1,2 mm tools for bayonet interface

Shear sleeve 3/16 ” tool to 1/4 inch interface

Shear sleeve 1/8 ” tool to 1/4 inch interface

Shear sleeve 1/8 ” tool to 3/16 inch interface

Shear sleeve 1/16 ” tool to 1/4 inch interface

Shear sleeve 1/16 ” tool to 3/16 inch interface

Pull tool holder for 0,5 mm tools in USB tweezers