Condor Sigma Vision solutions

11 МАРТ 2013

Partially transparent Condor Sigma measurement unit showing the integrated camera solution
Partially transparent Condor Sigma measurement unit showing the integrated camera solution

Condor Sigma » Vision

Image capture

The XYZTEC Vision system is ideal for providing high resolution images. These images can be used for customer presentations, operator training, or failure analysis reporting.

Software system

Our vision system is an integral part of the Condor Sigma software. The standard image capture camera has an offset from the tool test point. If desired, the software can be set up to capture an image of a failed pull, shear or any other test just completed. With one click the system will instantly calculate the offset and move to the camera position to capture the image. Captured images are stored with the measurement data. The image can be recalled when necessary to enable further analysis.

Condor Sigma Camera on a trinocular microscope
Condor Sigma Camera on a trinocular microscope

Image options

XYZTEC offers three camera options as part of the image capture capability. In addition to the left side offset camera, we offer a right side offset camera that can be used in conjunction with a different objective for higher magnification or greater field of view. When two magnifications are required, two rigidly mounted cameras provide better inherent accuracy than one camera with a zoom.

Example pictures taken with 3x objective
Example pictures taken with 3x objective
Example pictures taken with 3x objective - these pictures are shrunk for usage on this website

We also offer a camera that can be mounted on a trinocular microscope or from the side. These cameras can provide live video capture. This is a great function for automation, teaching and data capture for customer presentations.

Built-in LED lighting

XYZTEC’s image capture system utilizes the latest LED technology. The software controls the LED brightness and color. Automatic or manual operation are supported. If desired, settings for conditions such as brightness, intensity and LED color selection can be defined. We offer multiple color choices and the ability to operate in flash mode.

Fiducial Mark Recognition

Capability for accurate positioning

For fully automated tests, a fiducial mark system can be ordered as part of our image capture system. This capability allows for accurate positioning of tools prior to the start of an automated test sequence.

Screenshot of Fiducial mark recognition in Condor Sigma software
Screenshot of Fiducial mark recognition in Condor Sigma software

In automation mode, the software scans for fiducial marks. After identifying their X-Y coordinates, the Condor Sigma can begin a fully automated test sequence. Our software can import CAD data or it can be taught by teach and repeat.

The frame grabber camera function allows the operator to capture images before and after a test sequence.
 


Condor Sigma Vision brochure

Click here to download the Condor Sigma Vision brochure (PDF).

 


Specifications

Click here to view the specifications.


Newsletters

ДЕК 2019 Xyztec faces any challenge
ИЮЛ 2019 Meet the world’s biggest bond testers
АПР 2019 Free SMTconnect ticket? Register now
АВГ 2018 Is Fully Automatic Bond Testing Possible?
ИЮЛ 2017 Advances in Thin, 3D and MEMS Die Bond Strength Testing
МАЙ 2017 Shear testing copper pillar
МАР 2017 Fracture strength of thin wafers and die
ФЕВ 2017 Centralized database for enhanced security and SPC options
ЯНВ 2017 Full Automation with Improved Pattern Recognition, Fiducial Marks Analysis, Wire Detect and Failure Mode Analysis
ДЕК 2016 Тестирование покрытий и пленок
НОЯ 2016 Latest software release enables automatic grading
ОКТ 2016 Новые возможности в тестировании материалов

 
Click to subscribe.

Other news

24 СЕН Meet us at the Semicon Taiwan
02 МАР EPIC invests in XYZTEC’s most advanced bond tester
17 ЯНВ Visit us in Tokyo this month
13 НОЯ Visit us at Productronica in München
03 ОКТ Xyztec at EuWoRel Berlin
18 СЕН Sigma and Magazine Loader in action at Semicon Taiwan
17 СЕН Xyztec at EMPC conference in Pisa
04 СЕН Meet us worldwide in September
05 ИЮЛ Teaming up with Micronnect B.V. and BRIDGE S.r.l.
07 МАЙ Newest Sigma HF High Force bond tester live in action at SMTconnect
26 АПР XYZTEC spreads bond testing knowledge to partners worldwide
20 МАР Visit us at Semicon China
29 ЯНВ XYZTEC at Semicon Korea
21 НОЯ Presentation at CSPT 2018
15 НОЯ Matelec show 2018 for the Electrical and Electronics Industry with Antycip
20 СЕН Successful ESTC Conference in Dresden, Germany
11 ИЮЛ LEGO® for Nepal sponsored by XYZTEC
05 ИЮН Visit us at SMT Hybrid Packaging Nuremberg
20 АПР Smart LED and Solar panels for XYZTEC head office
18 АПР XYZTEC workshop at IMAPS UK
16 МАР ODEOM shows Condor Sigma in Istanbul
15 МАР Semicon China under way
31 ЯНВ Condor Sigma W12 at Semicon Korea
04 ДЕК Condor Sigma stars in Audi Tech Day video
10 НОЯ Raysun to represent XYZTEC in China


View all news

Subscribe to our RSS-feed to be notified of the latest news automatically. You can also find us on Facebook, LinkedIn, Twitter, Weibo 微博, Google+, YouKu 优酷 and YouTube.


XYZTEC Newsletter

Subscribe

Your name:

Your email:


© 1999-2016 XYZTEC BV Disclaimer, Privacy, Cookies

XYZTEC Нидерланды

J.F. Kennedylaan 14-B
5981 XC Panningen
Нидерланды (map / route)

телефон: +31-77-3060920
факс: +31-77-3060919

Find your local representative

XYZTEC Германия

Schäferei 18
06237 Leuna
OT Günthersdorf
Германия
(map / route)
телефон: +49-34638-666690
факс: +49-34638-666695
Cell: +49-172-3272991
Email: Dirk Schade

Совтест АТЕ

Компания Совтест является нашим дистрибьютором на территории России.

Россия, 305000, г. Курск,
ул.Володарского, д.49 а
факс: +7 (4712) 70-88-85
телефон в Курске:
+7 (4712) 73-04-90

Technology leader in bond testing worldwide