Home » KnowledgeCenter » Peel tests » Ribbon peel
The ribbon pull test is generally performed with a tweezer. The ribbon or wire to be tested by being gripped between the tweezer tips. The Z-stage then moves up and a pull force is applied on the ribbon.
In many cases, it is important to pull perpendicular during this application. To correct the angle, the XY stage and special linearity guides on the work holder are used. Xyztec is the only company that offers a bond tester with a 190 mm Z-stage. This makes our testers ideal for long ribbon applications, e.g. solar cells.
Our tweezers offer a standard pull force of 10kgf and a maximum clamping force of 3kgf. Using custom manual grippers, peel forces up to 200kgf are possible. The quick change tweezer design provide a lot of flexibility. Typical applications include gold ribbons, aluminium ribbons and thick wires as used in the construction of microwave, high frequency, high power, automotive, hybrid and solar devices.
Адрес электронной почты: *
Local support and parts, global presence, world-class testers
J.F. Kennedylaan 14b5981 XC PanningenThe Netherlands
Schäferei 1806237 LeunaOT GünthersdorfGermany
33 South Main St. Unit #1
PO box 2189
Wolfeboro, NH 03894
72/7 M.12 Soi. SoonthornwipakBangpla, Bangphli,10540 Samut PrakanThailand
No. 157, Zhongzheng 6th St., Hukou Township, Hsinchu County 303, Taiwan (R.O.C.)
Room 2012 Haichuang Mansion, No.288 Dengyun Road, High-tech district, Kunshan, Jiang Su, China
Create a PDF from the
Contact your localrepresentative
Follow us on:
© 2019 xyztec bv
Xyztec develops world-class bond testing technologies and works together with global partners to provide local support worldwide.